i-concave donsa izingcezu
Incazelo emfushane:
Incazelo yomkhiqizo:
I-PDC concave drill bit iwuhlobo lokumba oluphelele, olusetshenziswa kakhulu emayini yamalahle, izimayini, ukuhlola umhlaba, ukongiwa kwamanzi kanye namandla aphehlwa ngamanzi, umgwaqo onguthelawayeka, ujantshi, ibhuloho kanye nokwakhiwa.
Izinhlobo:
Uchungechunge lwe-YHA/YHB/YHC Luhlukaniswa Ngabasiki be-PDC
Uhlobo olujwayelekile—Uchungechunge lwe-YHC olunama-Ployscrystalline Diamond Compact ajwayelekile
Uhlobo oluqinisiwe—Uchungechunge lwe-YHB olunama-Series Grade B quaity reinforced cutters
Uhlobo lwamandla amakhulu—Uchungechunge lwe-YHA olunekhwalithi yeBanga A Abasiki be-PDC abahle kakhulu
Kuhlukaniswa ngohlobo lwempahla Yomzimba
Umzimba we-matrix
Umzimba Wensimbi (45号钢或者切削部分YG11刀片合金)
I-PDC imeleI-Polycrystalline Diamond Compactokubhekisela kubasiki kulezi zingcezu zokubhoboza.Amabhithi e-PDC anamazinga ahlukile okungena lapho kubholwa futhi angakwazi ukwenza ezinye izingcezu ezimeni ezifanele.
Abasiki bedayimane banamandla ngokuphindwe ka-10 kunensimbi kodwa ba-Brittle futhi bangalimala ekubunjweni okungapheli.
Amabhithi e-PDC athanda ukubhoboza ama-shale, itshe lobumba olunosawoti, ukhonkolo nezihlabathi.Gwema amatshe amatshe nesihlabathi.
I-PDC Bits a iyisinqumo esihle kakhulu semithombo ebizayo noma ejulile kakhulu futhi iphumelela kakhulu lapho kubholwa izinto eziqinile ezithambile kuya kwezimaphakathi.
Amabhithi e-PDC angakhiwa ngemizimba yensimbi noma imizimba ye-matrix.
Uzothola imbobo ejulile ngaphandle kwe-Matrix Body kodwa ayikwazi ukulungiswa noma ukuphinda ifakwe ithiphu ingase iqhekeke uma i-driller ithinta kancane kancane.
Ibhithi le-PDC lomzimba wensimbi liqine kakhulu kunomzimba we-matrix futhi ngeke liqhekeke.Ngeke ibhoboze ijule kangako kodwa ingalungiswa futhi ifakwe ithikithi.
Izicelo:
I-PDC concave drill bit iwuhlobo lokumba oluphelele, olusetshenziswa kakhulu emayini yamalahle, izimayini, ukuhlola umhlaba, ukongiwa kwamanzi kanye namandla aphehlwa ngamanzi, umgwaqo onguthelawayeka, ujantshi, ibhuloho kanye nokwakhiwa.
Lo mshini wokubhoboza uyindlela yokuqala okufanele isetshenziswe ekubambeni ukwakheka okuyinkimbinkimbi ngokuzinza okuphelele, ukudonsa kahle kwamanzi kanye nezinga lokungena ngokushesha.
• Uchungechunge uhlobo lokuxhuma:
I-API REG noma imicu eyenziwe ngokwezifiso yabesifazane noma yabesilisa.
Lapho ubhoboza ngezingcezu ze-ProDrill PDC kubalulekile ukwazi kanye nemiyalelo yethu yesisindo esinconyiwe kubhithi yokubhoboza kanye nokulawula isivinini sokujikeleza.
amathuluzi okubhoboza angahlinzeka ngamabhithi e-PDC ngosayizi ukusuka ku-3.5” (88.9mm) ukuya ku-121/4” (311.2 mm).Izingcezu zethu ze-PDC zinamaphiko ama-3 kuye kwayi-6, ama-Jet Nozzles nokuvikelwa kwegeji.
futhi Yakha izingcezu ze-PDC ze-RC drilling (i-reverse circulation drilling) izinhlelo zokusebenza.Sandard Osayizi Bokutholakala Ngokushesha: 3″ ukuya ku-12 1/4″ (76mm kuya ku-311mm)
Abanye osayizi abatholakalayo uma ubacela
| Ububanzi | Intshi | Amaphiko |
| mm | ||
| 76 | 3” | 3 |
| 89 | 3 1/2” | 3 |
| 92 | 3 5/8” | 3/4 |
| 95 | 3 3/4” | 3/4 |
| 98 | 3 7/8” | 3/4 |
| 102 | 4” | 3/4 |
| 108 | 4 1/4” | 3/4 |
| 114 | 4 1/2” | 3/4 |
| 127 | 5” | 3/4 |
| 133 | 5 1/4” | 3/4 |
| 146 | 5 3/4” | 3/4 |
| 152 | 6” | 3/4 |
| 171 | 6 3/4” | 3/4/5 |
| 191 | 7 1/2” | 3/4/5 |
| 216 | 8 1/2” | 4/5/6 |
| 223 | 8 3/4” | 4/5/6 |
| 251 | 9 7/8” | 4/5/6 |
| 311 | 12 1/4” | 4/5/6 |
Izingcezu ze-PDC concave drill
Abasiki benziwe nge-Polycrystalline Diamond Compact abanokuqina okuphelele kanye nesivinini esikhulu sokumba;
I-breaking post eyenziwe nge-YG11 alloy njengoba ingaphansi kwe-substrate, enamandla amakhulu okugoqa futhi ingaphula idwala kanye nabasiki;
I-gauge yenziwe nge-YG8C alloy enokumelana kahle nokugqokwa.Ingavikela ibhithi ekuncipheni phakathi nenqubo yokumba;
Ubukhulu be-nozzles buyi-8mm ~ 14mm.Ingakwazi ukukhipha udoti ngesikhathi esifanayo ukupholisa umsiki ngokusebenzisa uketshezi lokubhoboza;
PDC 3wing concave drill bit
Uhlobo Olujwayelekile: Lufanele ukwakheka kwe-f< 8;
Uhlobo Oluqinisiwe: Lufanele ukwakheka kwe-f< 12;
I-PDC 4wing concave drill bit
Uhlobo Olujwayelekile: Ifanele ukwakheka kwe-f< 10;
Uhlobo Oluqinisiwe: Ifanele ukwakheka kwe-f<15.
| Ipharamitha PDC 3wing concave drill izingcezu | ||||||
| Uhlobo | I-Dia(mm) | Ubude(mm) | Inombolo Yeposi | Uphiko Num | Inombolo yeNozzle | I-Nozzle Dia(mm) |
| Uhlobo OlujwayelekileUhlobo Oluqinisiwe | 60 | 120 | 2 | 3 | 5 | 6 |
| 75 | 120 | 2 | 6 | 5 | 8 | |
| 94 | 125 | 2 | 6 | 5 | 8 | |
| 113 | 130 | 2 | 9 | 5 | 10 | |
| 133 | 140 | 3 | 9 | 5 | 10 | |
| Ipharamitha PDC 4wing concave drill izingcezu | ||||||
| Uhlobo | I-Dia(mm) | Ubude(mm) | Inombolo Yeposi | Uphiko Num | Inombolo yeNozzle | I-Nozzle Dia(mm) |
| Uhlobo OlujwayelekileUhlobo Oluqinisiwe | 75 | 120 | 2 | 8 | 6 | 8~10 |
| 94 | 125 | 2 | 8 | 6 | 8~12 | |
| 113 | 130 | 2 | 12 | 6 | 10~12 | |
| 133 | 140 | 3 | 12 | 6 | 10~12 | |
| Ncoma ipharamitha yokusebenza ye-ZLONG drilling bits | ||||||
| Ububanzi(mm) | Isisindo kubhithi (KN) | Isivinini Sokubhoboza(RPM) | ||||
| 60 | 4.8~12 | 200~300 | ||||
| 65 | 4.8~12 | 200~300 | ||||
| 75 | 4.8~12 | 200~300 | ||||
| 94 | 6.4~16 | 150-250 | ||||
| 113 | 8.8~22 | 120-200 | ||||
| 133 | 15-30 | 100 ~ 200 | ||||
| 153 | 15-30 | 100 ~ 200 | ||||
| 173 | 15-30 | 100 ~ 200 | ||||
| 193 | 18-44 | 100 ~ 150 | ||||
| 215 | 18-44 | 100 ~ 150 | ||||
| Osayizi noma izinhlobo ezingabonisiwe zingenziwa ngokwezifiso ngokuya ngezidingo ezithile zokumba |
Incazelo Yomkhiqizo
Inombolo yemodeli.
uhlobo olujwayelekile nohlobo oluqinisiwe
Uhlobo
Umshini Wokubhoboza
Isicelo
Okokusebenzisa Imayini Yamalahle kanye Nokuhlola Indawo
Into Yezimayini
Imishini Yamalahle
Uphawu lokuhweba
YH
Ukucaciswa
55mm ~ 153mm
Umsuka
China
Ikhodi ye-HS
8207191000
